VCI=3.3V,IOVCC=1.8V-3.3V
//**************************//
void initi(void)
{
   res=1;
   delay(1);
   res=0;
   delay(10);
   res=1;
   delay(120);
//************* Start Initial Sequence **********
write_command(0xB1); 
write_data(0x02); 
write_data(0x35); 
write_data(0x36); 

write_command(0xB2); 
write_data(0x02); 
write_data(0x35); 
write_data(0x36); 

write_command(0xB3); 
write_data(0x02); 
write_data(0x35); 
write_data(0x36); 
write_data(0x02); 
write_data(0x35); 
write_data(0x36); 
//------------------------------------End ST7735 Frame Rate-----------------------------------------// 
write_command(0xB4); //Column inversion 
write_data(0x03); 
//------------------------------------ST7735 Power Sequence-----------------------------------------// 
write_command(0xC0); 
write_data(0xA2); 
write_data(0x02); 
write_data(0x84); 

write_command(0xC1); 
write_data(0xC5); 

write_command(0xC2); 
write_data(0x0D); 
write_data(0x00); 

write_command(0xC3); 
write_data(0x8D); 
write_data(0x2A); 

write_command(0xC4); 
write_data(0x8D); 
write_data(0xEE); 
//---------------------------------End ST7735 Power Sequence-------------------------------------// 
write_command(0xC5); //VCOM 
write_data(0x03); 

write_command(0x36); //MX, MY, RGB mode 
write_data(0xC8); 
//------------------------------------ST7735Gamma Sequence-----------------------------------------// 
write_command(0xe0); 
write_data(0x12); 
write_data(0x1C); 
write_data(0x10); 
write_data(0x18); 
write_data(0x33); 
write_data(0x2C); 
write_data(0x25); 
write_data(0x28); 
write_data(0x28); 
write_data(0x27); 
write_data(0x2F); 
write_data(0x3C); 
write_data(0x00); 
write_data(0x03); 
write_data(0x03); 
write_data(0x10); 

write_command(0xe1); 
write_data(0x12); 
write_data(0x1C); 
write_data(0x10); 
write_data(0x18); 
write_data(0x2D); 
write_data(0x28); 
write_data(0x23); 
write_data(0x28); 
write_data(0x28); 
write_data(0x26); 
write_data(0x2F); 
write_data(0x3B); 
write_data(0x00); 
write_data(0x03); 
write_data(0x03); 
write_data(0x10); 

write_command(0xFC); 
write_data(0x8C);

write_command(0x3A); //65k mode 
write_data(0x05); 

write_command(0x2a);//Set Column Address//128
write_data(0x00); 
write_data(0x00); 
write_data(0x00); 
write_data(0x7F); 

write_command(0x2b);//Set Page Address //128
write_data(0x00); 
write_data(0x20); //由于硬件设的是128*160,需页地址向后移32
write_data(0x00); 
write_data(0x9F); 

write_command(0x11); // Exit Sleep
delay(120);
write_command(0x29); // Display On
delay(25);
write_command(0x2C); 

}

//*********************************************************************************************
/*void EnterSleep (void)
{
    write_command(0x28);
    delay(20);
    write_command(0x10);
  
  }

//*********************************************************
void ExitSleep (void)

 {
    write_command(0x11);
    delay(120);
    write_command(0x29);

   }