//***************************************************************
//
//*****    Focus LCDs     *****
//***** LCDs Made Simple  *****
//***** www.FocusLCDs.com *****
//
//***************************************************************
//
//
//**************************//
NOTE:VCI=3.3V,IOVCC=1.8V-3.3V,
Display resolution:480*854
params->vertical_sync_active=4
params->vertical_backporch=20
params->vertical_frontporch=10
params->horizontal_sync_active=4
params->horizontal_backporch=40
params->horizontal_frontporch=20
params->RGB.PLL_CLOCK=(29)
//****************************************************************
void write_command (unsigned char y) // (uchar y,uchar x)
{
  unsigned char i;
csb=0;
sclb=0;
sdi=0;
sclb=1;
for(i=0;i<8;i++)
    {
     sclb=0;      
      if (y&0x80)
       {
          sdi=1;
        }
          else
         {
          sdi=0;
         }
       sclb=1;
      y=y<<1;
    }
csb=1;
}
//***************************************************************
void write_data(unsigned char w) // (uchar w, uchar v)
{
  unsigned char i;
csb=0;
sclb=0;
sdi=1;
sclb=1;
for(i=0;i<8;i++)
 {
  sclb=0;
     if (w&0x80)
     {
        sdi=1;
       }
          else
        {
         sdi=0;
        }
   sclb=1;
   w=w<<1;
    }
csb=1;
}
//--------------------initial code-----------------------------------------//
void LCD_Init(void)
{
	RST=1;  
	 delay(1)  //MS
	RST=0;
	 delay(10);//MS
	RST=1;
	 delay(120)//MS
//*******************************/
write_command(0x11);  //OUT SLEEP    
 delay(120);                
write_command(0xFF);
write_data(0x77);
write_data(0x01);
write_data(0x00);
write_data(0x00);
write_data(0x13);

write_command(0xEF);
write_data(0x08);
/*-------------------------------Bank0 Setting--------------------------------*/
/*--------------------------Display Control setting---------------------------*/
write_command(0xFF);
write_data(0x77);
write_data(0x01);
write_data(0x00);
write_data(0x00);
write_data(0x10);

write_command(0xC0); //480*854    
write_data(0xE9);
write_data(0x03);

write_command(0xC1);
write_data(0x10);
write_data(0x0C);

write_command(0xC2);//Inversion selection  
write_data(0x31);//31 2-DOT 37-Column 
write_data(0x0A);

write_command(0xCC);
write_data(0x10);
//**********GAMMA SET***************//
write_command(0xB0);
write_data(0x0D);
write_data(0x14);
write_data(0x9C);
write_data(0x0B);
write_data(0x10);
write_data(0x06);
write_data(0x08);
write_data(0x09);
write_data(0x08);
write_data(0x22);
write_data(0x02);
write_data(0x4F);
write_data(0x0E);
write_data(0x66);
write_data(0x2D);
write_data(0x1F);

write_command(0xB1);
write_data(0x00);
write_data(0x17);
write_data(0x9E);
write_data(0x0F);
write_data(0x11);
write_data(0x06);
write_data(0x0C);
write_data(0x08);
write_data(0x08);
write_data(0x26);
write_data(0x04);
write_data(0x51);
write_data(0x10);
write_data(0x6A);
write_data(0x33);
write_data(0x1B);
/*-----------------------------End Gamma Setting------------------------------*/
/*------------------------End Display Control setting-------------------------*/
/*-----------------------------Bank0 Setting  End-----------------------------*/
/*-------------------------------Bank1 Setting--------------------------------*/
/*--------------------- Power Control Registers Initial ----------------------*/
write_command(0xFF);
write_data(0x77);
write_data(0x01);
write_data(0x00);
write_data(0x00);
write_data(0x11);

write_command(0xB0);
write_data(0x30);
/*--------------------------------Vcom Setting--------------------------------*/
write_command(0xB1);
write_data(0x5C);
/*------------------------------End Vcom Setting------------------------------*/
write_command(0xB2);//VGH 
write_data(0x81); //+12V

write_command(0xB3);
write_data(0x80);

write_command(0xB5);//VGL  
write_data(0x43);//-8V  4E

write_command(0xB7);
write_data(0x85);

write_command(0xB8); //avdd  
write_data(0x20);

write_command(0xC1);
write_data(0x78);

write_command(0xC2);
write_data(0x78);

write_command(0xD0);
write_data(0x88);
/*--------------------End Power Control Registers Initial --------------------*/
//********GIP SET********************///
write_command(0xE0);
write_data(0x00);
write_data(0x00);
write_data(0x02);

write_command(0xE1);
write_data(0x06);
write_data(0xA0);
write_data(0x08);
write_data(0xA0);
write_data(0x05);
write_data(0xA0);
write_data(0x07);
write_data(0xA0);
write_data(0x00);
write_data(0x44);
write_data(0x44);

write_command(0xE2);
write_data(0x30);
write_data(0x30);
write_data(0x44);
write_data(0x44);
write_data(0x6E);
write_data(0xA0);
write_data(0x00);
write_data(0x00);
write_data(0x6E);
write_data(0xA0);
write_data(0x00);
write_data(0x00);

write_command(0xE3);
write_data(0x00);
write_data(0x00);
write_data(0x33);
write_data(0x33);

write_command(0xE4);
write_data(0x44);
write_data(0x44);

write_command(0xE5);
write_data(0x0D);
write_data(0x69);
write_data(0x0A);
write_data(0xA0);
write_data(0x0F);
write_data(0x6B);
write_data(0x0A);
write_data(0xA0);
write_data(0x09);
write_data(0x65);
write_data(0x0A);
write_data(0xA0);
write_data(0x0B);
write_data(0x67);
write_data(0x0A);
write_data(0xA0);

write_command(0xE6);
write_data(0x00);
write_data(0x00);
write_data(0x33);
write_data(0x33);

write_command(0xE7);
write_data(0x44);
write_data(0x44);

write_command(0xE8);
write_data(0x0C);
write_data(0x68);
write_data(0x0A);
write_data(0xA0);
write_data(0x0E);
write_data(0x6A);
write_data(0x0A);
write_data(0xA0);
write_data(0x08);
write_data(0x64);
write_data(0x0A);
write_data(0xA0);
write_data(0x0A);
write_data(0x66);
write_data(0x0A);
write_data(0xA0);

write_command(0xE9);
write_data(0x36); 
write_data(0x00);

write_command(0xEB);
write_data(0x00);
write_data(0x01);
write_data(0xE4);
write_data(0xE4);
write_data(0x44);
write_data(0x88);
write_data(0x40);

write_command(0xED);
write_data(0xFF);
write_data(0x45);
write_data(0x67);
write_data(0xFA);
write_data(0x01);
write_data(0x2B);
write_data(0xCF);
write_data(0xFF);
write_data(0xFF);
write_data(0xFC);
write_data(0xB2);
write_data(0x10);
write_data(0xAF);
write_data(0x76);
write_data(0x54);
write_data(0xFF);

write_command(0xEF);
write_data(0x10);
write_data(0x0D);
write_data(0x04);
write_data(0x08);
write_data(0x3F);
write_data(0x1F);

write_command(0xFF);     
write_data(0x77);   
write_data(0x01);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);  

write_command(0x35);//TE ON 
write_data(0x00);

write_command(0x36);     
write_data(0x00);//10-180

write_command(0x3A);     
write_data(0x50);

write_command(0x29); //DISP ON
 delay(25);
}
//*******************************************
void EnterSleep (void)
{
    write_command(0x28);
     delay(10);
    write_command(0x10);
  
  }

//*********************************************************
void ExitSleep (void)

 {
    write_command(0x11);
     delay(120);
    write_command(0x29);

   }