/* E35GH-I-MW800-CB MIPI DSI TFT Display Driver File
   Created on August 29, 2025, 15:10 AM

   @Company
	 Focus LCDs
	 LCDs Made Simple
	 www.focuslcds.com

   @File Name
	 E35GH-I-MW800-CB-init.txt

   @Summary
	 This is the driver source file for the TFT Display
	 Display:         3.5" TFT LCD 320 x 480
	 Controller Chip: ILI9488
	 Interface:       MIPI DSI 1-Lane
	 MCU/MPU:         Generic

   @Version
	 Version 1.0.0 (Semantic Versioning 2.0.0)

   @Description
	 This source file provides initialization for the 3.5" TFT display.
*/
/*******************************************************************************/

/*******************************************************************************
	(c) 2023 Focus LCDs and its subsidiaries. You may use this software and any
	derivatives exclusively with Focus LCDs products.

	THIS SOFTWARE IS SUPPLIED BY FOCUS LCDS "AS IS". NO WARRANTIES, WHETHER
	EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY IMPLIED
	WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A
	PARTICULAR PURPOSE, OR ITS INTERACTION WITH FOCUS LCDS PRODUCTS, COMBINATION
	WITH ANY OTHER PRODUCTS, OR USE IN ANY APPLICATION.

	IN NO EVENT WILL FOCUS LCDS BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
	INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND
	WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF FOCUS LCDS HAS
	BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE
	FULLEST EXTENT ALLOWED BY LAW, FOCUS LCDS' TOTAL LIABILITY ON ALL CLAIMS IN
	ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
	THAT YOU HAVE PAID DIRECTLY TO FOCUSLCDS FOR THIS SOFTWARE.

	FOCUS LCDS PROVIDES THIS SOFTWARE CONDITIONALLY UPON YOUR ACCEPTANCE OF THESE
	TERMS.
*******************************************************************************/



/*
.active width = 320,
.active height =480,
.hfpd = 10,         	// horizontal front porch (pixels)
.hbpd = 20,     	// horizontal back porch (pixels)
.hspw = 4,	        // h sync width (pixels)
.vfpd = 10,          	// vertical front porch (lines)
.vbpd = 10.        	// vertical back porch (lines)
.vspw = 5,           	// v sync width (lines)

.DCLK=13.5Mhz
*/



void LCD_Init(void)
{

//************* Reset LCD Driver ****************// 
LCD_nRESET = 1; 
Delayms(1); // Delay 1ms 
LCD_nRESET = 0; 
Delayms(10); // Delay 10ms // This delay time is necessary 
LCD_nRESET = 1; 
Delayms(120); // Delay 120 ms 

LCM_Write(Gen,0,16,0xE0,0x00,0x10,0x14,0x01,0x0E,0x04,0x33,0x56,0x48,0x03,0x0C,0x0B,0x2B,0x34,0x0F); 
 
LCM_Write(Gen,0,16,0xE1,0x00,0x12,0x18,0x05,0x12,0x06,0x40,0x34,0x57,0x06,0x10,0x0C,0x3B,0x3F,0x0F); 
 
LCM_Write(Gen,0,3,0xC0,0x0F,0x0C);   
 
LCM_Write(Gen,0,2,0xC1,0x41);    
 
LCM_Write(Gen,0,4,0xC5,0x00,0x25,0x80); 
 
LCM_Write(Gen,0,2,0x36,0x48); 
 
LCM_Write(Gen,0,2,0x3A,0x66);    
 
LCM_Write(Gen,0,2,0xB0,0x00);     
 
LCM_Write(Gen,0,2,0xB1,0xA0);    
 
LCM_Write(Gen,0,2,0xB4,0x02);    
 
LCM_Write(Gen,0,3,0xB6,0x02,0x02);   
   
 
LCM_Write(Gen,0,2,0xE9,0x00);     
 
LCM_Write(Gen,0,5,0xF7,0xA9,0x51,0x2C,0x82);  
 
LCM_Write(Gen,0,2,0x21,0x00); 
 

LCM_Write(Gen,120,2,0x11,0x00); //Delay 120ms
LCM_Write(Gen,20,2,0x29,0x00);  //Delay 20ms

}