//***************************************************************
//
//*****    Focus LCDs     *****
//***** LCDs Made Simple  *****
//***** www.FocusLCDs.com *****
//
//***************************************************************
//
//
//**************************//
NOTE:VCI=3.3V,IOVCC=1.8V,
Display resolution:480*800
params->dsi.vertical_sync_active=4
params->dsi.vertical_backporch=20
params->dsi.vertical_frontporch=10
params->dsi.horizontal_sync_active=4
params->dsi.horizontal_backporch=35
params->dsi.horizontal_frontporch=20
params->dsi.PLL_CLOCK=(336)MBPS
params->RGB_CLOCK=(27)MHZ
Frame Rate=60HZ
//**************************************
//--------------------initial code-----------------------------------------//
void LCD_Init(void)
{
	RST=1;  
	 delay(1)  //MS
	RST=0;
	 delay(10);//MS
	RST=1;
	 delay(120)//MS
//*******************************/
write_command(0x11);  //OUT SLEEP    
 delay(120);                
/*-------------------------------Bank0 Setting--------------------------------*/
/*--------------------------Display Control setting---------------------------*/
write_command(0xFF);     
write_data(0x77);   
write_data(0x01);   
write_data(0x00);   
write_data(0x00);   
write_data(0x10);   

write_command(0xC0);  //480*800     
write_data(0x63);   
write_data(0x00);   

write_command(0xC1);     
write_data(0x11);   
write_data(0x02);   

write_command(0xC2);   //Inversion selection    
write_data(0x37);  //31 2-DOT 37-Column 
write_data(0x08);   

write_command(0xCC);     
write_data(0x18);   
//**********GAMMA SET***************//
write_command(0xB0);     
write_data(0x40);   
write_data(0xC9);   
write_data(0x91);   
write_data(0x0D);   
write_data(0x12);   
write_data(0x07);   
write_data(0x02);   
write_data(0x09);   
write_data(0x09);   
write_data(0x1F);   
write_data(0x04);   
write_data(0x50);   
write_data(0x0F);   
write_data(0xE4);   
write_data(0x29);   
write_data(0xDF);   

write_command(0xB1);     
write_data(0x40);   
write_data(0xCB);   
write_data(0xD0);   
write_data(0x11);   
write_data(0x92);   
write_data(0x07);   
write_data(0x00);   
write_data(0x08);   
write_data(0x07);   
write_data(0x1C);   
write_data(0x06);   
write_data(0x53);   
write_data(0x12);   
write_data(0x63);   
write_data(0xEB);   
write_data(0xDF);   
/*-----------------------------End Gamma Setting------------------------------*/
/*------------------------End Display Control setting-------------------------*/
/*-----------------------------Bank0 Setting  End-----------------------------*/
/*-------------------------------Bank1 Setting--------------------------------*/
/*--------------------- Power Control Registers Initial ----------------------*/
write_command(0xFF);     
write_data(0x77);   
write_data(0x01);   
write_data(0x00);   
write_data(0x00);   
write_data(0x11);   

write_command(0xB0);     
write_data(0x65);   
/*--------------------------------Vcom Setting--------------------------------*/
write_command(0xB1);     
write_data(0x6A);//65+++
/*------------------------------End Vcom Setting------------------------------*/
write_command(0xB2);//VGH     
write_data(0x87);   

write_command(0xB3);     
write_data(0x80);   

write_command(0xB5); //VGL       
write_data(0x49);   

write_command(0xB7);     
write_data(0x85);   

write_command(0xB8); //avdd     
write_data(0x20);   

write_command(0xB9);  //Power Control 2     
write_data(0x10);   

write_command(0xC1);     
write_data(0x78);   

write_command(0xC2);     
write_data(0x78);   

write_command(0xD0);     
write_data(0x88);   
delay(100);                
/*--------------------End Power Control Registers Initial --------------------*/
//********GIP SET********************///
write_command(0xE0);     
write_data(0x00);   
write_data(0x00);   
write_data(0x02);   

write_command(0xE1);     
write_data(0x08);   
write_data(0x00);   
write_data(0x0A);   
write_data(0x00);   
write_data(0x07);   
write_data(0x00);   
write_data(0x09);   
write_data(0x00);   
write_data(0x00);   
write_data(0x33);   
write_data(0x33);   

write_command(0xE2);     
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);   

write_command(0xE3);     
write_data(0x00);   
write_data(0x00);   
write_data(0x33);   
write_data(0x33);   

write_command(0xE4);     
write_data(0x44);   
write_data(0x44);   

write_command(0xE5);     
write_data(0x0E);   
write_data(0x60);   
write_data(0xA0);   
write_data(0xA0);   
write_data(0x10);   
write_data(0x60);   
write_data(0xA0);   
write_data(0xA0);   
write_data(0x0A);   
write_data(0x60);   
write_data(0xA0);   
write_data(0xA0);   
write_data(0x0C);   
write_data(0x60);   
write_data(0xA0);   
write_data(0xA0);   

write_command(0xE6);     
write_data(0x00);   
write_data(0x00);   
write_data(0x33);   
write_data(0x33);   

write_command(0xE7);     
write_data(0x44);   
write_data(0x44);   

write_command(0xE8);     
write_data(0x0D);   
write_data(0x60);   
write_data(0xA0);   
write_data(0xA0);   
write_data(0x0F);   
write_data(0x60);   
write_data(0xA0);   
write_data(0xA0);   
write_data(0x09);   
write_data(0x60);   
write_data(0xA0);   
write_data(0xA0);   
write_data(0x0B);   
write_data(0x60);   
write_data(0xA0);   
write_data(0xA0);   

write_command(0xEB);     
write_data(0x02);   
write_data(0x01);   
write_data(0xE4);   
write_data(0xE4);   
write_data(0x44);   
write_data(0x00);   
write_data(0x40);   

write_command(0xEC);     
write_data(0x02);   
write_data(0x01);   

write_command(0xED);     
write_data(0xAB);   
write_data(0x89);   
write_data(0x76);   
write_data(0x54);   
write_data(0x01);   
write_data(0xFF);   
write_data(0xFF);   
write_data(0xFF);   
write_data(0xFF);   
write_data(0xFF);   
write_data(0xFF);   
write_data(0x10);   
write_data(0x45);   
write_data(0x67);   
write_data(0x98);   
write_data(0xBA);   

write_command(0xFF);     
write_data(0x77);   
write_data(0x01);   
write_data(0x00);   
write_data(0x00);   
write_data(0x00);  

//write_command(0x35);//TE ON 

write_command(0x36);     
write_data(0x00);//10-180

write_command(0x3A);     
write_data(0x70);

write_command(0x29); //DISP ON
    
 delay(25);

Łę
//*******************************************
void EnterSleep (void)
{
    write_command(0x28);
     delay(10);
    write_command(0x10);
  
  }

//*********************************************************
void ExitSleep (void)

 {
    write_command(0x11);
     delay(120);
    write_command(0x29);

   }